Ngwaahịa
-
Akụkụ nchara a36 A53 Q235 Q345 carbon Hathonazed Galvvanized Galvvanized ígwè na-ahụ
ASTM hà nha A na-akpọkarị dị ka otu uzo, bụ ogologo ígwè nwere akụkụ abụọ nke abụọ. There are equal angle steel and unequal angle steel.The width of two sides of an equal angle steel is equal. The specification is expressed in mm of side width × side width × side thickness. Dịka "× 30 × 30" Enwere ike igosipụta ya site na ụdị. The model is the centimeter of the side width, such as ∟ 3 × 3. The model does not represent the dimensions of different edge thicknesses in the same model, so the edge width and edge thickness dimensions of angle steel shall be filled in completely in Nkwekọrịta na akwụkwọ ndị ọzọ iji zere iji ihe atụ ahụ naanị. Nkọwapụta nke ọkụ na-ekpo ọkụ na-eto eto na eriri dị iche iche bụ 2 × 3-20.
-
Tebụl dị ugbu a na-anọchite anya ọkọlọtọ EuropeU (UPN, UNP) Ọwa, Ntụle nchara (unn y), nkọwa, akụrụngwa, akụkụ. Emepụtara dịka ụkpụrụ:
Din 1026-1: 2000, NF A 45-202: 1986
En 10163-3: 2004, Klas C, Spaclass 1 (Ọnọdụ Ọnọdụ)
Stn 42 5550
TDP: Stn 42 0135 -
Upn na-etolite UpN100 UPN120 A572 Q235 Q355 Q36 A36 Ígwè ígwè
Tebụl dị ugbu a na-anọchite anya ọkọlọtọ EuropeU (UPN, UNP) Ọwa, Ntụle nchara (unn y), nkọwa, akụrụngwa, akụkụ. Emepụtara dịka ụkpụrụ:
Din 1026-1: 2000, NF A 45-202: 1986
En 10163-3: 2004, Klas C, Spaclass 1 (Ọnọdụ Ọnọdụ)
Stn 42 5550
TDP: Stn 42 0135 -
The IPN beam, also known as an IPE beam, is a type of European standard I-beam with a specifically designed cross-section that includes parallel flanges and a slope on the inner flange surfaces. These beams are commonly used in construction and structural engineering for their strength and versatility in providing support for various structures such as buildings, bridges, and industrial facilities. A maara ha maka ikike ibu ha dị elu ma na-ejikarị ngwa dị iche iche n'ihi arụmọrụ ha kwesịrị ntụkwasị obi.
-
-
-
European Standard m ipn 8 mm 20mm s235jr A36 S275Jr SS400 m
The IPN beam, also known as an IPE beam, is a type of European standard I-beam with a specifically designed cross-section that includes parallel flanges and a slope on the inner flange surfaces. These beams are commonly used in construction and structural engineering for their strength and versatility in providing support for various structures such as buildings, bridges, and industrial facilities. A maara ha maka ikike ibu ha dị elu ma na-ejikarị ngwa dị iche iche n'ihi arụmọrụ ha kwesịrị ntụkwasị obi.
-
ASTM hà nhacommonly known as angle iron, is a long steel with two sides perpendicular to each other. There are equal angle steel and unequal angle steel.The width of two sides of an equal angle steel is equal. The specification is expressed in mm of side width × side width × side thickness. Dịka "× 30 × 30" It can also be expressed by model. The model is the centimeter of the side width, such as ∟ 3 × 3. The model does not represent the dimensions of different edge thicknesses in the same model, so the edge width and edge thickness dimensions of angle steel shall be filled in completely in Nkwekọrịta na akwụkwọ ndị ọzọ iji zere iji ihe atụ ahụ naanị. Nkọwapụta nke ọkụ na-ekpo ọkụ na-eto eto na eriri dị iche iche bụ 2 × 3-20.
-
-
Akụkụ ụdọ attm carbon ka carbon na-agbanyụ nchara nchara nchara
Otu nchara, a na-akpọkarị dị ka otu uzo, bụ ogologo ígwè nwere akụkụ abụọ na-agbakwa ibe ha. E nwere otu eriri nchara na akụkụ na-enweghị isi. A na-egosipụta nkọwapụta na mm nke obosara dị n'akụkụ ọkwù dị n'akụkụ. Dịka "× 30 × 30" Enwere ike igosipụta ya site na ụdị. The model is the centimeter of the side width, such as ∟ 3 × 3. The model does not represent the dimensions of different edge thicknesses in the same model, so the edge width and edge thickness dimensions of angle steel shall be filled in completely in Nkwekọrịta na akwụkwọ ndị ọzọ iji zere iji ihe atụ ahụ naanị. Nkọwapụta nke ọkụ na-ekpo ọkụ na-eto eto na eriri dị iche iche bụ 2 × 3-20.
-
UPNN80 / 100 nchara profaịlụ na-ejikarị na-ewu ewu
Tebụl dị ugbu a na-anọchite anya ọkọlọtọ EuropeU (UPN, UNP) Ọwa, Ntụle nchara (unn y), nkọwa, akụrụngwa, akụkụ. Emepụtara dịka ụkpụrụ:
Din 1026-1: 2000, NF A 45-202: 1986
En 10163-3: 2004, Klas C, Spaclass 1 (Ọnọdụ Ọnọdụ)
Stn 42 5550
TDP: Stn 42 0135 -
Carbon steel chegharịrị efere 4 mm carbon steel guzobere mpempe akwụkwọ
Mpekere nchara na-enyocha ya bụ ite nke ígwè na-akpọlite diamond ma ọ bụ usoro ahịrị n'elu, na-enye nnabata na traction. A na-ejikarị ha maka ụlọ ọrụ mmepụta ihe, ụzọ ụkwụ, steepụ, na ngwa ndị ọzọ ebe sili nguzogide dị mkpa. These plates come in various thicknesses and dimensions and can be made from carbon steel, stainless steel, or other metals, offering versatility and durability in a wide range of industrial and commercial settings.